DX-CTBSM5

Cable tie saddle mounts are fixing bases designed to hold cable ties in a set position so cables, looms and small hoses can be bundled neatly to a panel or frame.

Key product details

• Pack quantity: 100
• Mount size: 22.3 x 16 mm
• Hole size: 5 mm
• Brand: DeltX

Typical applications

These saddle mounts are commonly used in electrical, automotive, maintenance and general workshop applications where cables need to be routed securely along a flat surface. They help keep wiring organised and reduce movement, but the correct choice still depends on the cable tie width, the fixing method and the material the mount is being attached to.

Choosing the right cable tie mount

Check the available fixing point before ordering. The hole size must suit the screw or rivet you intend to use, while the saddle size should match the cable tie and bundle you want to secure. If the mount is going onto a panel exposed to vibration, heat or moisture, make sure the fixing method and material are suitable for the environment.

Handling and installation

Install on a clean, flat surface for the best hold. Position the saddle mount before tightening the fixing, then thread the cable tie through the mount and around the cable bundle. Do not overtighten the tie, as this can damage cables or make later maintenance more difficult.